Cat.No.
EPB-027
Product Name
Ammonia Nitrogen Degrading Bacteria Agent
Product Ingredients
Pseudomonas, Bacillus, Nitrifying and denitrifying bacteria, Corynebacterium, Achromobacter, Alcaligenes, Agrobacterium, Arthrobacter, etc.
Product Format
Powder
Shelf Life
24 Months
Bacterial Content
20×109 CFU/g
Application
Suitable for municipal sewage treatment plants, various chemical wastewater, printing and dyeing wastewater, landfill leachate, food wastewater and other industrial wastewater treatment anoxic system.
Efficacy and Effect
1. Helium-nitrogen degradation agent has both decomposing bacteria and synthetic bacteria, including anaerobic bacteria, facultative bacteria and aerobic bacteria. Ammonia degrading bacteria agent uses the synergistic effect of various bacteria to decompose refractory organic matter into small molecular substances, and further degrade it into nitrogen, carbon dioxide and water, so that ammonia nitrogen and total nitrogen can be effectively degraded without secondary pollution. It is an environmentally friendly and efficient microbial agents;
2. By adding nitrifying bacteria, this product can shorten the acclimation time and film-hanging time of activated sludge, accelerate the start-up of the sewage treatment system, reduce the residence time of sewage, and improve the overall treatment capacity;
3. Adding ammonia-helium degrading bacteria to the sewage treatment process can improve the sewage helium-helium treatment efficiency by more than 60% on the original basis without changing the treatment process, and reduce treatment costs. It is an environmentally friendly and efficient microbial agent.
2. By adding nitrifying bacteria, this product can shorten the acclimation time and film-hanging time of activated sludge, accelerate the start-up of the sewage treatment system, reduce the residence time of sewage, and improve the overall treatment capacity;
3. Adding ammonia-helium degrading bacteria to the sewage treatment process can improve the sewage helium-helium treatment efficiency by more than 60% on the original basis without changing the treatment process, and reduce treatment costs. It is an environmentally friendly and efficient microbial agent.
Usage Method
According to the water quality index of the biochemical system, the amount of industrial waste water added for the first time is 100-200 g/m3 (calculated according to the volume of the biochemical pool). The dosage of strengthening biochemical system is 30-50 g/m3 (calculated according to the volume of biochemical pool). The amount of municipal sewage added is 30-50 g/m3 (calculated according to the volume of the biochemical pool).
Use Parameters
Tests have shown that the following physical and chemical parameters are most effective for bacterial growth:
1. pH: the average range is between 5.5 and 9.5, and the fastest growth can be achieved between 6.6 and 7.8. Practice has proved that the pH at 7.5 has the best treatment efficiency.
2. Temperature: It can take effect between 8°C and 60°C. If the temperature is higher than 60°C, the bacteria will die; when the temperature is lower than 8°C, the bacteria will not die, but their cell growth will be greatly restricted. The most suitable temperature is 26-32°C.
3. Dissolved oxygen: In the aeration tank in sewage treatment, the dissolved oxygen amount is at least 2 mg/L; the metabolism and degradation of the target substance will be accelerated by the bacteria with high adaptability in sufficient oxygen 5 to 7 times.
4. Trace elements: Proprietary bacteria need many elements in their growth, such as potassium, iron, calcium, sulfur, magnesium, etc. Usually, soil and water sources contain sufficient amounts of the above elements.
5. Salinity: It is suitable for industrial sewage with high salinity, and can tolerate a salinity of up to 6%.
6. Anti-toxicity: It can effectively resist chemical toxic substances, including chlorides, cyanides and heavy metals.
Note: When the contaminated area contains fungicides, their effect on microorganisms should be studied beforehand.
1. pH: the average range is between 5.5 and 9.5, and the fastest growth can be achieved between 6.6 and 7.8. Practice has proved that the pH at 7.5 has the best treatment efficiency.
2. Temperature: It can take effect between 8°C and 60°C. If the temperature is higher than 60°C, the bacteria will die; when the temperature is lower than 8°C, the bacteria will not die, but their cell growth will be greatly restricted. The most suitable temperature is 26-32°C.
3. Dissolved oxygen: In the aeration tank in sewage treatment, the dissolved oxygen amount is at least 2 mg/L; the metabolism and degradation of the target substance will be accelerated by the bacteria with high adaptability in sufficient oxygen 5 to 7 times.
4. Trace elements: Proprietary bacteria need many elements in their growth, such as potassium, iron, calcium, sulfur, magnesium, etc. Usually, soil and water sources contain sufficient amounts of the above elements.
5. Salinity: It is suitable for industrial sewage with high salinity, and can tolerate a salinity of up to 6%.
6. Anti-toxicity: It can effectively resist chemical toxic substances, including chlorides, cyanides and heavy metals.
Note: When the contaminated area contains fungicides, their effect on microorganisms should be studied beforehand.
Data Sheet
